Skip to main content
MKON72
MKON72
MKON72

Microtronik Autohex II BMW WVCI HW4 Diagnostic Scan Coding Programming Tool Standard Package FREE EXPRESS SHIPPING

Write a Review
$3,550.00 (approx. EUR €3,266.00)
Add to Wishlist
Product Code: MKON72 Manufacturer: Microtronik Categories: Key Programming Tools In Stock Free Worldwide Shipping New Arrival
Product Specifications
Manufacturer Microtronik
Condition New

Autohex II HW4 and Full functions of ISN read and write in CAS, EGS, DME and DDE by OBD, BMW ISTA-D Driver, FA Manager, and Diagnose services

Using this kit you can do following:

  • Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.
  • Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0
  • Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0
  • Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
  • CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
  • BMW E series EGS ISN matching with CAS
  • BMW F series EGS 6HP and 8HP EWS Resetting
  • BMW E and F series coding for all Ecus (calculation of Ecucoding is calculated from FA)
  • Vehicle order modification and backup and restore from LM,FRM,...ETC
  • Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
  • Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
  • Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
  • Read ISN of MSD85, MSD87, MSV90 in F series ( For writing you need ISN boot mode ).

What you miss in this Kit:

  • BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
  • BMW E and F Key programming (can be ordered later)
  • ISN Reading from Tricore Ecus by boot mode. (can be ordered later)

What you get:

  • Autohex II Hardware WVCI HW 4
  • BMW Software Standard License
  • BMW ISTA/D driver to run dealer software
  • 1 year technical support
  • 1 year hardware warranty

To top