Microtronik Autohex II BMW WVCI HW4 Diagnostic Scan Coding Programming Tool Lite Locksmith Package FREE EXPRESS SHIPPING
Write a Review
$2,650.00 (approx. EUR €2,438.00) Add to Wishlist
Product Code: MKON71 Manufacturer: Microtronik Categories: Key Programming Tools In Stock Free Worldwide Shipping New Arrival
Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost
Using this kit you can do following:
- Read old ISN in BMW E series for following Ecus:D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
- Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
- Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
- Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
- CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
- Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
- Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
- Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
- Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
- Read ISN of MSD85, MSD87, MSV90 in F series.
- Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).
- Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
- Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.
- Modify KOMBI Mileage by HexTag tool.
- Renew all BMW keys, and many other brands by HexTag tool.
What you miss in this Kit:
- BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
- Modify ISN/SK in DME, DDE and CAS by OBD (can be ordered later)
- Reset EGS 6HP/8HP EWS (can be ordered later)
- Ecu Coding, and Vehicle Order managing (can be ordered later)
- ISN Reading from Tricore Ecus by boot mode. (can be ordered later)
What you get:
- Autohex II Hardware WVCI HW 4
- The powerful HexTag BDM and Key programmer.
- BMW Software Lite Locksmith License
- Key Programming License
- BMW ISTA/D driver to run dealer software
- 1 year technical support
- 1 year hardware warranty