Mercedes Benz Full EIS EZS ESL Dash ECU TCU ISM Test Platform & Xhorse VVDI MB BGA Tool Bundle With Free Gift Xhorse Doll
Mercedes EIS Tester Overview:
The Mercedes EIS & ESL Testing Tool Designed For On-bench Testing Of Electronic Switch EZS (EIS), Electronic Steering Lock ESL ( ELV )
Mercedes EIS Bypass, Dashboard & Gateway It Comes With Built-in Electronic Steering Lock ESL Emulator Inside
And Has Automatically Mode Switching Between Old And New Versions Of Steering Lock Emulators.
The Mercedes Benz EZS, EIS, ELV , Esl, Dash & Gateway Tester Enables You To Check The Electronic Switch (EIS / EZS) With The Car Electronic Steering Lock (ESL / ELV ) .
Or With The Emulator If The First ESL / ELV Isn't Available Using ESL Emulation Mode Which Is Built-in.
You Can Run Mercedes EZS Test For Both Old (Motorola Based EZS) And New (Nec Based EIS) Units Without The Car
Just Connect It With The Eiz ELV Test Cables And Test The EIS Or Test The Keys
If They're Working & Program Or Repair The Steering Lock ELV .
The New Generation Comes With A Built-in ESL / ELV Emulator For W204, W207 To Check The EIS Without The First ESL / ELV (Must Be Programmed Before Testing)
The Mercedes Benz EIS Test Platform Is Often Used With Most Mercedes Key Programming Devices
And It'll Assist You Once You Do Mercedes EIS Repair Service.
It's Far Better Than All Mercedes EIS ELV Test Platform & Mercedes EZS Tester Kit Within The Market Between All Mercedes EZS ESL Tester Devices
No Additional Mercedes EIS ELV Test Kit / Mercedes Steering Lock Tester Is Required Because It Comes With The Complete Range Of Cables
What does the test platform do?
* Support Testing EZS/EIS without ESL/ELV
* Support Reading EZS/EIS file or Password without Gateway
* Support Testing or Renew TCU, ISM, ECUS
* Support Different Programming Tools
* Support MB Dealer Tool Diagnostic, Coding
* Support All FBS3 Modules
* Reserve Wiring Position to satisfy DIY Enthusiasts
Supported Mercedes EIS / EZS Testing, Mercedes EZS Password Reading:
W208 / W210 (Embedded Emulator) Support: Read EIS Password + ELV Test + OBD Control
209 / W211 (Embedded Emulator & Embedded Gateway) Support: Read EZS Password + ELV Control + OBD Control
W169 / W245 (Embedded Emulator & Embedded Gateway) Support: Password Reading + ELV Control + OBD Control
W203 / W639 / Vito (Embedded Emulator) Support: Password Reading + Mercedes ESL Test + Dashboard Control + OBD Control
W906 / Crafter / Sprinter (Embedded Emulator) Support: Password Reading + ELV Control + Dashboard Control + OBD Control
W215 / W220 Support: EZS Password Reading + OBD Control
W204 / W207 / W212 (W204/w212 Embedded Emulator) Support:
EIS Password Reading + W204 EIS Renew + W204 Steering Lock Control + Program ELV Emulator For W204 + OBD Control + Dashboard Control To Check Instrument Cluster & Programming
W164 Support: W164 EIS Password Reading (Embedded Gateway) + OBD Control
W221 Support: W221 EZS Password Reading + EIS Erase Password Reading + W221 EIS Renew + OBD Control
W246 Support: W246 EIS Password Reading + Dashboard Control + OBD Control
New – W212 Support: W212 EIS Password Reading + EZS Erase Password Reading + W212 EIS Renew + Dashboard Control + OBD Control
New – W447 / W176 New Model (Fbs4 + Fbs3) Support: EIS Password Reading + Dashboard Control + ELV Control + OBD Control
New – W222 / W205 New Model (Fbs4 + Fbs3) Support: EZS Password Reading + Dashboard Control + OBD Control
Mercedes ESL Testing & Programming Steering Lock ESL / ELV :
W204 / W207 / W212 Support Read / Write OBD Control (EZS / Renew W204 ESL / ELV Testing / ELV Personalize)
W208 / 210 Support Read / Write OBD Control (EZS / ELV Testing Platform / ELV Personalize)
W209 / W211 Support Read / Write OBD Control (EZS / ELV Steering Lock Testing / ELV ESL Personalize)
W203 / W639 / Vito Support Read / Write OBD Control (EZS / ELV Testing / ELV Steering Lock Personalize)
W906 / Crafter / Sprinter Support Read / Write OBD Control (Mercedes EZS / Bypass ELV & Testing Original Car ELV / ELV Personalize)
New – W447 / W176 Support Read / Write OBD Control (EZS / ELV Testing / ELV Personalize)
New – Gearbox ECU Out:
– (VVDI Mb Mercedes Benz ECU Renew Cables Adapters Kit Compatible)
This Mercedes EIS Tester – EIS Testing Tool Is Compatible With Many Mercedes Key Programming Devices:
Top 6 Reasons to Buy VVDI MB Tool:
1. VVDI MB Tool Language: English, Polish, Spanish (Will add more in future)
2. Latest VVDI MB Tool Version: 5.1.1
3. Fastest Benz password calculation speed.
4. High quality, Professional Design.
5. Support all key lost: W210, W204, W207, W166, W230, W246, W212, W212(old), some W216, W164 2009- and some others.
The future will add more.
6.Support FBS4 disable key function (Other function->FBS4 disable key)- Support W166/W205/W213/W218/W222/W246 type
1. If you had (Condor Dolphin, or Condor MINI Plus, or IKEYCUTTER CONDOR XC-007 Master or IKeycutter CONDOR XC-MINI Master).
You can get the password freely once a day. Contact us to bind for you. For the second or third calculate, it needs tokens or points.
You can buy Tokens for VVDI MB BGA Tool Password Calculation from us.
2. VVDI MB Tool renew function, if your ECU can be read via VVDI MB, it is supported, or not.
V5.1.1 VVDI MB Tool Update (2021-07-14 ) Require firmware V5.0.1 BENZ V5.1.1
1. Release user manual V2.1 version
Xhorse VVDI MB BGA TOOL Functions:
1. Read Write Key :
Identification key, IR read-write BE key, read v51, v67 version's key password by NEC adapter,
Read activate blank BGA (OCF4) key, current key HASH (repair), renew, write into the used NEC key, write smart key, etc.
2. Password Calculation :
OBD read and calculate all (FBS3) can protocol EIS password, support BGA keys, NEC key, v51, v57 version password calculation,
Support all key lost W164, W216, W166, W209, W211, W212, W246, W212(old), W204, W207, etc, online calculation key password
3. ESL Tools :
OBD (Kline) read data, Renew ESL, replace ESL (no need to renew EIS), check ESL damage, repair W204 ESL
4. Read/ Write Gateway :
Support OBD repair KM: W204, W207, W212, W251, W164, W211, W221, W216, W166.W172, W232, W205, etc
Support reading and writing gate EEPROM and FLASH: W211/W/164/W204/W207/W212/W221/W216 etc
5. EIS Tools :
Read 8 write ES by OBD or ROBD auto-detect, access to W164 W209 W211 without gateway.
Read the old Motorola EIS(k-line)’s password.
Renew EIS, Replace EIS, Enable key, Disable key. Personalize W204 ESL - Test ESL Status/Working key etc
6. Prepare Key File :
Online generate v11, v41, v51 version's key file, support Motorola EIS
EPROM file, with high efficiency, 1009 successful generate
7. Program ECU / Gearbox / ISM :
Support renew ECU, gearbox, and SM, write in VN, personalized, etc
Latest Technical VVDI Benz BGA Tool Details:
Note: VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model Support IR/OBD:
W164, W164 2009+
A166, W197, W212, W218, A246
A169, W209, W211
W172, W204, A207
W204, W207, W212 only by dump
W209 only by dump
Keys Version Supported:
v03, v06, v08
v05, v07, v09
VVDI Benz BGA Tool Review:
1. I test password from 212 new models super good tool need pay 2 tokens to need 10 min all ok
2. Do you have to see a video of this tool They say can do all key lost on w212.No tool can do it even Mehaco or nec pro51.
w212 eis on video, sure it can. Mehaco/Mercedes instrument can do all keys lost on w212.. the option is available a few months.
I try to collect the list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU -read PSW IR - not successful
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful
W203: EIS/EZS A203.545.05.08 - MCU - read PSW IR - OK
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful
W220: EIS/EZS A215.545.02.08 - MCU - read PSW IR - OK
W220: EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successful
W639: EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W220 IES 215 545 02 08 read PSW IR – OK
Only support parts of HC05, HC08 Motorola EIS(Kline), it cannot support will show error, need to remove eis get EEPROM.
We have tested W215 ok, but not means all W215 can support.
only support parts of this type.
vvdi MB got an slk 2013 all keys lost, can this be done via obd.
VVDI Benz BGA Tool Package List:
1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K-Line in OBD line
8. OBD line
9. Plastic Box
10. Carton Box
Q1: I tested read data with obd2 210 kline working and 204 car read with obd 2,
but 211 not read with obd2 cable connect
pin 1: ESL 1
pin 2: GND
pin 3 : +12V (30)
pin 5: pin 6: CAN H (Green)
pin 7: CAN L
pin 8: CAN H
CAN ANYONE TEST
A: Read eis via obd for W164, W169, W211, W209, require gateway connected
Q2: I bought an EIS W221 lock with a key from the lock from one machine. I have read the PSW.
I will make a complete loss of the W221 key in the future?
Describe step by step procedure
A: you have used/2nd-hand EIS with working key, you can do like this for W221 all keys lost
1. Read all key lost EIS data-> save EIS data
2. Read used EIS data enter a password, wipe off password->renew used EIS.
3. Load step1 EIS data to renewed EIS with password->write EIS data
4. Load EIS data(with key password)->prepare key file
5. Input new key to device IR reader->load key file->write
6. Insert new key to EIS->EIS will learn the new key->key learn success
by the way, if your all key lost W221 is Motorola EIS, not need to change EIS, remove eis get EEPROM by the programmer(VVDI PROG).
then load EEPROM to VVDI MB TOOL prepare key file.
Q3: I have a w204 All key lost and I program a new EIS with VVDI, the ignition doesn't come on or crank,
but the steering can lock and unlock.
can someone guide me on what to do?
A: about W204 all key lost(change new EIS), refer to following steps, maybe helpful:
1. Read EIS data via obd, then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3. Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4. Personalize W204 ESL
5. Load EIS data(with Key Password)->Prepare Key File
6. Input new Key to device IR reader->Load Key file->write
7. Insert new Key to EIS->EIS will learn the new key->key learn success
Q4: Is there a way to delete the used key with VVDI MB BGA?
A: Yes, VVDI MB TOOL supports that!
Get more about VVDI MB BGA Tool FAQ and Answers
1. For the customers who bought VVDI MB from us before, the package had 1 adapter not working.
Now we can send you the exchanged new adapter freely. Pls, contact customer service.
2. We released a new nec adapter. Support the Original smart and non-smart key erases and write.
The original nec adapter in the VVDI MB package can only support Original non-smart key erase and write.