Microtronik Autohex II BMW WVCI HW4

Autohex II HW4 and all features included in BMW standard license functions besides the tricore ISN reader

Using this kit you can do following:

• Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.
• Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0
• Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0
• Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
• ISN Reading from Tricore Ecus by boot mode.
• CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
• BMW E series EGS ISN matching with CAS
• BMW F series EGS 6HP and 8HP EWS Resetting
• BMW E and F series coding for all Ecus (calculation of Ecucoding is calculated from FA)
• Vehicle order modification and backup and restore from LM,FRM,...ETC
• Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
• Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
• Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
• Read and write ISN of MSD85, MSD87, MSV90 in F series

What you miss in this Kit:

• BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
• BMW E and F Key programming (can be ordered later)

What you get:

• Autohex II Hardware WVCI HW 4
• BMW Software Standard License
• ISN Boot Mode License
• BMW ISTA/D driver to run dealer software
• 1 year technical support
• 1 year hardware warranty