BitBox GM ACDelco Petrol Gen1 CAN

BitBox GM ACDelco Petrol Gen1 CAN

Product Description:

Software Activation From BitSoftware with Product Number: MK23056

Specs:

Manufacturer: BitSoftware

Module GM ACDelco Petrol Gen1 CAN

Module for reading and writing through OBD2 connector by CAN-bus ACDelco Gen1 ECUs used in petrol GM vehicles.

GM ACDelco E38 (FID: 96)

ECU is based on MCU Motorola MPC561 with external flash memory 2.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E39 (FID: 100)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E39A (FID: 97)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E67 (FID: 99)

ECU is based on MCU Motorola MPC565 with external flash memory 2.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E78 (FID: 94)

ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E80 (FID: 102)

ECU is based on MCU Motorola MPC5676 with internal flash memory 6.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

GM ACDelco E83 (FID: 91)

ECU is based on MCU Motorola MPC5565 with internal flash memory 2.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

GM ACDelco E92 (FID: 98)

ECU is based on MCU NXP SPC5674 with internal flash memory 4.0Mb.

Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.

Reading/writing time about 3-5 minutes!

New ECU type will be added as soon as possible!