Ford Emulator - Focus Emulator C-Max Kuga C1 Platform 2012 & UP Steering Lock Simulator Emulator With Lock Sound

Ford Emulator Focus Emulator C-Max Kuga C1 Platform 2012 & UP Steering Lock Simulator Emulator With Lock Sound Black Connector Type

Product Description:

Emulator From MK3 with Product Number: MK7446
This Weight Product: 40g

Ford Emulator Focus Emulator C-Max Kuga C1 Platform 2012 & UP Steering Lock Simulator Emulator Specs:

Manufacturer: MK3
Condition: New

Ford Emulator Focus C-Max Kuga C1 Platform 2012 & UP Steering Lock Simulator Emulator Overview:

Device Emulates Ford ESCL Unit, compatible with Ford C1 Platform Cars ( Focus MK2 , C-MAX etc) Stating form 2012 & UP

Ford Emulator is Plug & Play , No Programming Required.

• ELV Is A Self-occurring Mechanical Failure In The Steering Column Lock.
• The Occurrence Of The Fault Does Not Depend On Any Fault.
• In Case Of Malfunction, Even If There Is No Problem In The Vehicle Key, The Working Key Will Not Start The Vehicle Because The ELV Steering Column Lock Will Not Be Activated.
• In This Case, A New ELV Steering Column Lock Must Be Installed In The Vehicle And Programmed Into The Vehicle.

Steering lock problem is one of the most frequent Problems in many cars including the Ford Mondeo S-Max Galaxy Starting System. and when the steering lock is faulty, the car will start even if the customer has a 100% working key for it until you order a new steering lock for it from FORD agencies. BUT instead of spending hundreds of dollar for order a new OEM steering lock, we offer you this economic solution; the MK3 Ford Mondeo Emulator which needs NO PROGRAMMING, just plug and start!

This emulator replaces the faulty Ford ESCL Units, it is compatible with Ford CD4 Platform Cars ( Mondeo , S-Max Galaxy etc) Stating form 2014 and up with Original SCL Number Av6N-3F880-Kx and a four pin connector

Ford Emulator Focus C-Max Kuga C1 Platform 2012 & UP Steering Lock Simulator Emulator Installtion on Car :

1. Turn off the ignition.
2. Plug the ESL connector into the our emulator.
3. The SCL works only when it receives open and close signal.
4. Push the start button and the green led lights. If the red led blinks, there is an error that has to be erased by any diagnostic tool.