Name: SPVG 8 PRO Systems Bluetooth USB Interface Professional Diagnostic Tool
Brand: SPVG Systems
SKU: MK17750
Price: 1550 USD
Availability: InStock

Product Specifications

Manufacturer	SPVG Systems
Condition	New
Weight	475 g

SPVG 8 PRO Systems Bluetooth USB Interface Professional Diagnostic Tool for Programming Keys and Remote Controls

SPVG 8 PRO Systems Product Description:

New SPVG 8 PRO Systems Bluetooth USB Interface Professional Diagnostic Tool for Programming Keys and Remote Controls

Key Programming Tools From SPVG Systems with Product Number: MK7750

SPVG 8 PRO Systems Specs:

Manufacturer: SPVG Systems
Condition: New

Professional diagnostic tool for programming keys and remote controls to Volkswagen Group vehicles.
Supersedes v7i.
Interface v8.6 now supports both USB & Bluetooth.
The licence subscription for current year is included.

This tool has advanced ability to extract security codes via diagnostics and will program keys and remotes to Volkswagen Group vehicles with immobiliser system platforms: Type 1, 2, CAN BUS TP2 (2004 - 2010), CAN BUS UDS (2009+) and the newer VW MQB platform (2013+). Coverage extends to both proximity push button start (KESSY) and non prox.

SPVG 8 Diagnostic Tool VAG Models 2013- (2015-, USA 2018-) MQB MODELS

How to get the dealer key and how to assign it to the car.

SPVG 8 Diagnostic Tool Required equipment:

SPVG formerly SuperVAG
Transponder programmer
Key with transponder TP48AES

SPVG 8 Diagnostic Tool Applications:

Cars VW, Skoda, SEAT – models 2013 – 2019 (USA 2018- )

Get immobilizer data
KEY PROGRAMMING VW Models 2013 - FLIP KEY
KEY PROGRAMMING VW Models 2013 – KESSY (PROXY KEY)
All Key Lost Situation Solution for Keyless System (KESSY) MQB
List of control units and their connection for application note: All Key Lost Situation Solution for Keyless System (KESSY) MQB
Get the dealer key - work in progress
Key learning with KESSY button for MQB Vehicles

SPVG 8 Diagnostic Tool VAG Models 2009-2013(-2015, USA-2017) UDS MODELS

SPVG 8 Diagnostic Tool Required equipment:

SPVG formerly SuperVAG
Transponder programmer (needed for SMART KEY system)
Add-on device SVG149 (needed for situation when All key lost )
Online internet connection (needed for SMART KEY system)

SPVG 8 Diagnostic Tool Applications:

Cars VW, Skoda, SEAT – models 2009 – 2012 -2015 (USA -2018)*
* depends on facelift of appropriate vehicle model

SPVG 8 Diagnostic Tool Description:
SPVG introduced new methods on learning the keys. There are two different methods on how to add a key (Flip key and Smart key).

Vehicle with flip key

Start by cutting blank keys
Set the communication with the immobilizer system ( key programming)
Select Key programming (NO PIN needed)
Check the type of transponder. If SPVG says TP22..TP25 needed then program the blank TP48 transponder to appropriate variant (Audi, Volkswagen, Skoda, Seat)
Confirm you have key prepared
Enter the number of keys to be programmed (eg 2 or +1).
Follow the instructions in SPVG and on dashboard (0-2, 1-2, …)
Set the communication with remote control system ( remote programming)
Make sure you have all the car remotes with you
Select Remote control programming
All remotes need to be programmed together (no +1 option, all non-present remotes will be erased)
Check the function of keys and remotes.

Vehicle with SMART key

Cut the blank SMART key first.
Set the communication with the immobilizer system ( key programming)
Select Key programming (Kessy)
Check the type of transponder. If SPVG says TP22..TP25 needed then program the blank TP48 transponder to appropriate variant (Audi, Volkswagen, Skoda, Seat)
Confirm you have key prepared
Enter the number of keys to be programmed (eg 2 no +1 option). All keys need to be programmed at the same time
Follow the instructions in SPVG and on dashboard (0-2, 1-2, …)
Program remotes follow instructions displayed in SPVG
Check the function of keys and remotes.

SPVG 8 Diagnostic Tool VAG Models 2006-2009

Application note SPVG formerly SuperVAG
Precoding of transpoder and learning key
Required equipment:
· SPVG formerly SuperVAG
· Transponder programmer
· Add-on device SVG157 (needed for situation when All key is lost )
Application
· VW, Skoda, SEAT – models 2006 – 2009 ( except Touareg and Phaeton)
Description
There is a new regime for learning keys (transponders) introduced by Volkswagen cars. The transponder does not read the car identity during the learning process, but the code (so called Component security) must be stored to the transponder before.
You should use a transponder programmer for precoding it. This code (Component security) must be found out from the car.

Read the PIN and Component security bytes
In the program SPVG select the appropriate model and set the communication by clicking on Learning key. Wait until the program detects the control unit types and displays the identification of control units.

2. Click on the Read PIN button. On some cars you can select if you want to read the PIN from the engine control unit or from the instrument cluster. Information about Component security is automatically displayed too.
Note: If you read PIN and Component security from the engine control unit (or is the engine automatically selected), you get only 6 bytes of the component security. You have to get the 7th byte from the existing valid key. It must be done with a transponder programmer. (Follow the step Search of 7th byte of component security ).

All key lost situation VDO Micronas

If you are in the All key lost (no working key), the data cannot be read directly. You must get the instrument cluster into the Service mode using the device SPVG SVG157 (without this device you cannot continue).
· You have to dismount the instrument cluster from the car and remove the back cover.
1. Connect the blue connector of the SPVG SVG157 device to the instrument cluster.
2. Connect the SPVG communication interface to the SPVG SVG157 device.
3. Connect the power supply (12V). Lights on the instrument cluster must light.
4. Run SPVG program, select appropriate vehicle and Key learning function.

· After detecting the type of instrument cluster (next menu is displayed), select the function Read PIN.
· You will be asked about connecting the pogo (spring) pin to a special point on the printed circuit board of the instrument cluster.
· Follow the pictures below, the position depends on the type of printed circuit board .
· Follow the instructions in the program (connect and disconnect pogo pin , turn switch Term30 ON and OFF, wait necessary time) and you get the valid data file or PIN + Component security bytes (all 7 bytes).

SPVG 8 Diagnostic Tool VAG Models 2006 – 2009 (VW New Beetle)

Precoding of transpoder and learning key Required equipment:
· SPVG formerly SuperVAG
· Transponder programmer Application
· VW New Beetle – models 2006 – 2009

Description
There is a new regime for learning keys (transponders) introduced by Volkswagen cars. The transponder does not read the car identity during the learning process, but the code (so called Component security) must be stored to the transponder before. You should use a transponder programmer for precoding it. This code (Component security) must be found out from the car. In comparison to other cars 2006-2009, a specific ID must be stored to the transponder, otherwise it is not accepted by the immobilizer. Description: This type of immobilizer has a problem to learn a new transponder. The only way is to create a clone of a valid transponder. You need to know component security bytes and ID of valid transponder.
Using of transponder:
· Using of TP48w transponder is necessary.
· Transponder must be "precoded" by transponder programmer.

Read the PIN and Component security bytes

Find out the PIN and Component security bytes.
In the SPVG program, select the appropriate model and set the communication by clicking on the Learning key. Wait until the program detects the control unit types.
2. Click on the Read PIN button. On some cars you can select if you want to read the PIN from the engine control unit. Information about Component security is automatically displayed too.
Note: SPVG reads PIN and Component security from the engine control unit, so you get only 6 bytes of the component security. You have to get the 7th byte from the existing valid key. It must be done with a transponder programmer. Using the procedure Searching of the 7byte of component security .

Get the “precoded” transponder (Tango)

How to get the "precoded" transponder using Tango programmer.
Note: As a raw transponder, the type of TP48W must be used (rewriteable).
Select transponder type: MEGAMOS 48
Read the valid ID from the valid key (transponder) using button R, the valid ID is displayed in the left bottom rectangle (Word 3-2). See the picture.
Write down this ID on the paper.
example of Transpoder ID: In the left bottom rectangle (Word 3-2), the bytes B4 03 2E AD 2. Using button Search Comp Tool find the 7th byte of component security (button Write Comp Sec in the picture above).
Write down all 7 bytes of component security on the paper.
3. Insert new TP48w transponder to the Tango programmer, press read.
Rewrite the ID bytes with the value you noted on the paper in step 1.
Click on the button Write next to the line with the ID (Word 3-2). 4. Select menu: Tools/Utilities/Image Generators/TP22-25 Select the appropriate manufacturer of the car and write the selection to the transponder (button W ). 5. Program 7 bytes of component security
Select transponder type: MEGAMOS 48
Click on the Button Write Comp Sec.
Enter 7 bytes of component security, select the manufacturer of the car and
write the data to the transponder.

Get the "precoded" transponder (Miraclone)

How to get the "precoded" transponder using Miraclone programmer.
Note: As a raw transponder, the type of TP48W must be used (rewriteable).
Select transponder type: MEGAMOS 48
Read the valid ID from the valid key (transponder) using button R, the valid ID is displayed in the left bottom rectangle (caption is ID). See the picture.
Write down this ID on the paper.
Example of Transpoder ID: In the red ellipse, the bytes A9 6E 6B 2C 2. Using the button Search Comp Tool find the 7th byte of component security.
Write down all 7 bytes of component security on the paper.
3. Insert new TP48w transponder to the Tango programmer, press read.
Rewrite the ID bytes with the value you noted on the paper.
Click on the button Write next to the line with the ID. 4. Select menu: Programmer
In the left window select Megamos Crypto ID 48/VAG CAN and select the manufacturer of the car – VW or Audi or SEAT or Skoda.
Write the selection to the transponder (click on the Transponder button ). 5. Programm 7 bytes of component security
Select menu Special and click on button VAG Component Security -> ID: 48 6. Enter 7 bytes of component security, select the producer of the car and click on the button with icon of transponder.

Learning the transponder to the car

In this use-case the transponder is known by the car immediately.
You can make the learning process, but it has no reason (The key is cloned, so both are the same).

Supported cars

VW New Beetle 2006-2009

SPVG 8 Diagnostic Tool VAG Models 2003-2005

Application note SPVG formerly SuperVAG
Precoding of transpoder and learning key
Required equipment:
· SPVG formerly SuperVAG
· Transponder TP22..25
Application
· VW, Skoda, SEAT – models 2003 – 2005
· Audi A3, TT – models 2003-2005
Description
For using in these cars, the transponder must be precoded (new type TP22-TP25).
You should use a transponder programmer for precoding it or buy precoded transponders.
Procedure
1.Find out the PIN.
In the SPVG program, select the appropriate model and set the communication by clicking on the Learning key. Wait until the program detects the control unit types.
2. Click on the Read PIN button. On some cars you can select if you want to read the PIN from the engine control unit or from the instrument cluster. The button is divided into two areas then.
3. Take a precoded transponder:
TP22 .... SEAT
TP23 …. Audi
TP24 … Skoda
TP25 … Volkswagen
Note: You can create your own transponder from TP48 using a transponder programmer. Follow the instructions of your transponder programmer.
4. Learning keys to the car
Insert the precoded transponder to the cut key learn it to the car using function Key learning in SPVG diagnostic tools – KEY program.
Note: All keys must be coded once by the procedure. If the customer does not have all keys with him, don't learn the keys, otherwise the other keys won't work anymore (become forgotten).

Supported cars

List of cars supported (more info on the website www.spvgsystems.com)

All VW/Skoda/SEAT cars with immobilizer of 4th generation. (Depends on facelift of the model after 2003, until year 2006).

SPVG 8 Diagnostic Tool VAG Models 2000 – 2003 (-2008)

Models 2000 – 2003 (-2008)

Application note SPVG formerly SuperVAG
Precoding of transpoder and learning key
Required equipment:
· SPVG formerly SuperVAG
· Transponder TP48 CAN
Application
· VW, Audi, Skoda, SEAT – models 2000 – 2003
· Models VW Polo, Skoda Fabia, Seat Ibiza up to year 2008
Description
In these cars, the Megamos 48 crypto transponder is used.
Procedure
1. Find out the PIN.
In the SPVG program, select the appropriate model and set the communication by clicking on the Learning key. Wait until the program detects the control unit types.
2. Click on the Read PIN button. On some cars you can select if you want to read the PIN either from the engine control unit or from the instrument cluster.
3. Insert a new Megamos 48 Crypto transponder into the cut key.
4. Learning keys to the car
Insert new transponder to the cut key learn it to the car using function Key learning in SPVG diagnostic tools – KEY program.
Note: All keys must be coded once by the procedure. If the customer does not have all keys with him, don't learn the keys, otherwise the other keys won't work anymore (become forgotten).

Supported cars

List of cars supported (more info on the website www.spvgsystems.com)
All VW/Audi/Skoda/SEAT cars with immobilizer of 3rd generation.

SPVG 8 Diagnostic Tool VAG Models 1992-2000

Application note SPVG formerly SuperVAG
Precoding of transpoder and learning key

Required equipment:
· SPVG formerly SuperVAG
· Transponder TP5
Application
· VW, Audi, Skoda, SEAT – models 1992 – 2000
Description
In these cars, the transponder transponder TP5 or similar is used.
Procedure
1. Find out the PIN.
In the SPVG program, select the appropriate model and set the communication by clicking on the Learning key. Wait until the program detects the control unit types.
2. Click on the Read PIN button.
3. Insert a new transponder into the cut key.
4. Learning keys to the car
Insert new transponder to the cut key learn it to the car using function Key learning in SPVG diagnostic tools – KEY program.
Note: All keys must be coded once by the procedure. If the customer does not have all keys with him, don't learn the keys, otherwise the other keys won't work anymore (become forgotten).

SPVG 8 Diagnostic Tool Remote control learning:
Learning of remote control without diagnosis

Product Code:	MK17750
Categories	Key Programming Tools
Manufacturer	SPVG Systems