Skip to main content
Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & Xhorse VVDI Mini Key Tool Device Free Express Shipping MKON210
Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & Xhorse VVDI Mini Key Tool Device Free Express Shipping
Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & Xhorse VVDI Mini Key Tool Device Free Express Shipping
Xhorse VVDI BIMTool PRO Device & Xhorse VVDI Mini Key Tool OFFER -| thumbnail
NEW Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & Xhorse VVDI Mini Key Tool Device - Free Express Shipping -| thumbnail

Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & Xhorse VVDI Mini Key Tool Device Free Express Shipping

Write Review
$1,099.00 Was $1,130.00 (Save $31) (€923.16)
Add to Wishlist
Product Code: MKON210
Categories Key Programming Tools
Manufacturer Xhorse
In StockIn Stock Free Express ShippingFree Express Shipping
Product Specifications
Manufacturer Xhorse
Condition New

2021 New Xhorse VVDI Bim Tool Pro Enhanced Edition Of VVDI BMW Tool For BMW

This Tools is Updated On May 2021 New Xhorse VVDI Bim Tool Pro Enhanced Version Available Now. Far Better Than Before!

VVDI Bimtool Pro New Features:

  1. Add Ethernet Port, Support 10/100m Programming Via Ethernet.
  2. Support Wifi 802.1b/g, 150mbps High-speed Connection, and Wifi Ota Upgrade
  3. Support DoIP Vehicle/module Programming
  4. Support BMW ECU Programming (NBT/CIC) (Connect Via Network Cable)
  5. Greatly Speed Up The F/G Chassis Programming (Connect Via Network Cable)
  6. Support BMW E-sys and Rheingold Diagnostic System. Ready To Replace The Specialized Devices. (Connect Via Network Cable)
  7. Support Directly Read ISN Data Without Disassembling The Ecu (N13 / N20 / N55 / N63)
  8. Language: English, Italian, Spanish, German, Hungarian
  9. Works On All Windows Computers, Like Win7, Win8, Win10, No Computer Os Limitation.


Note:
1. Don't Use The Web Cable and USB Cable At An Equivalent Time. For Key Programming, Use USB Cable, Coding Use Internet Cable.
2. When Connecting The Vvdibim Device With Pc, It'll Display"Booting" On The Small Screen, After 20 Secs It'll Display As "BMW", Then It's Connected Ok.

Xhorse VVDI BIMTool Pro Support BMW E-sys and Rheingold Diagnostic System

VVDI BIM Tool Pro Functions:

Functions of VVDI BIM Tool

  1. E-Series programming, coding, DTCs
    • Support autodetect car chassis
    • Support scan all car units
    • Support calculate all configuration units
    • Support read/write car configuration (FA)
    • Support input HW/ZB number to programming
    • Support calculate default coding from FA
    • Support edit detail coding information, change car config
    • Support many languages DTC code
  2. F-Series programming, coding, DTCs
    • Support autodetect car chassis
    • Support read/write car configuration (FA)
    • Support calculate programming files from unit, car, whold database
    • Support calculate default coding from FA
    • Support edit detail coding information, change car config
    • Support detail special function list from coding
    • Support many languages DTC code
  3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
    • Support read key information, write key inforamtion
    • Support key learning
    • Support read/write EEPROM
    • Support read ECU/ gearbox synchronize codes
    • Support write ECU/ gearbox synchronize codes
    • Support synchronize ECU and CAS
    • Support synchronize CAS and ELV
    • Support read ISN via OBDII
    • Support reset KM via OBDII
    • Support disable key/enable key
  4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
    • Support read CAS encrypt key via OBDII
    • Support key learning via programmer and via ignition switch
    • Support disable key / enable key
    • Support erase key position
    • Support reset KM via OBDII
    • Support read ISN via OBDII
    • Support backup/restore coding
    • Support update original CAS4 file
  5. FEM/BDC OBD key learning
    • Support read FEM/BDC encrypt key via OBDII
    • Support key learning via programmer and via ignition switch
    • Support disable key/enable key
    • Support erase key position
    • Support reset KM via OBDII
    • Support read ISN via OBDII
    • Support backup/restore coding
    • Support exchange used FEM/BDC
    • Support close/ open transport mode
    • Support reset ECU lock
    • Support switch on ignition without working key
  6. CAS EEPROM dump key learning
    • Support EWS1, EWS2, EWS3, EWS4, CAS1( 0K50E ), CAS2( 2K79X ), CAS3( 0L01Y ), CAS3+( 0L15Y ), CAS3++ISTAP ( 0L15Y, 0M23S )
    • Support prepare dealer key via programmer
    • Support disable key/ enable key
    • Support read ISN from working key
  7. 8HP Gearbox renew
    • Support clear ISN in 8HP gearbox
    • Support backup / restore coding
    • Support reset adaptation information
  8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc
  9. Read E-Series/F-Series ECU ISN via OBDII
    • Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851
    • Support MED17xx / MVD17xx / MEVD17xx /MV1722
    • Support MED172 / MEV17N46 / ME17N45
    • Support MEVD172Y / MEVD172 / MEVD1725 / B38 / X63TU
  10. Support exchange ECU and CAS
    • Support write ECU ISN via OBDII
    • Support write ECU VIN via OBDII
    • Support change ECU ISN and VIN with EEPROM dump
    • Support chagne CAS1 / CAS2 / CAS3 / CAS4 ISN and VIN with EEPROM dump
  11. CAS repair(OBD&EEPROM)
    • Support repair ISTAP CAS
    • Support repair CAS EEPROM ( Service Mode EEPROM ), you can start engine after repair the file(CAS1 , CAS2 , CAS3 , CAS3+ , CAS3++ISTAP)
  12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN
    • Support CAS3+ ( 1L15Y ) encrypt version
    • Support CAS3++ (ISTAP ) version
    • Support CAS4+ ( 5M48H ) version
  13. File KM calibration
    • Support EWS1, EWS2, EWS3, EWS4
    • Support CAS1( 0K50E ), CAS2 ( 2K79X ), CAS3 ( 0L01Y ), CAS3+ ( 0L15Y, 0M23S )
    • Support CAS4( 1L15Y ), CAS4 ( 5M48H, 1N35H )
    • Support E-Series dashboard EEPROM( M35080 )
    • Support F-Series dashboard EEPROM( 35160, 35128 )
  14. Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer
  15. EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG

VVDI Bimtool Pro Tool FAQ:

A: I Received The Package But Xhorse VVDI Bimtool Pro Doesn't Work. There Was No Reference To The Car (Either Via Can Or Kline Bus).
I Updated The Device To The Most Recent Software and Firmware. Any Ideas?
Q: You Ought To Short The Component Within The Following Computer Circuit Board With A Zero-ohm Resistor Below The Image

VVDI Bim Tool Pro Update Log:

V1.7.3 Software
2021-04-22
Require Firmware V1.6.4
BMW V1.7.3
1. Support Program Didn't Support Unlock Fem/BDC Directly After Programming Can Do Unlock Function
2. Bugfix For E-series Programming
3. Improvement For F/g-series Programming and Coding
4. Bugfix

Package List:

1pc * VVDI Bimtool Pro Main Unit
1pc * Obd Cable
1pc * Coaxial Cable
1pc * USB Cable
1pc * Ecu Reflash Cable
1pc * Plastic Box

vvdi bimtool pro package list

To top